Kenmore Elite 795.7802 Series Use & Care Manual page 22

4. Remove the four screws (1), the hinge pin insert (2) and
the hinge pin brackets (3) from the bottom right side of
the door.
5. Reinstall the hinge pin brackets (1), screws (2) and hinge
pin insert (3) on the bottom left side of the door.
7. Carefully lift up the freezer door. Remove and place it
on a nonascratching surface.
Bottom Hinge
Pin
8. Using a 1/4 in. socket wrench, loosen and remove
the.8hinge pin from the bottom hinge.
J
Bottom Hinge Pin
9. Using a 13/32-inch or lOmm socket wrench with a 2 in.
extension and a screwdriver, loosen the two bolts and
the screw, and remove the bottom hinge on right side.
Screw
Bolts
NOTE: Before removing the freezer door, make sure you
completely remove the refrigerator door.
6. Use a 1/4 inch hex socket wrench to loosen and remove
the hinge pin (t) from the middle hinge bracket. Use a
10 mm or 13/32 in. socket wrench to remove the two
bolts (2). Remove the screw (3) and set the middle hinge
bracket (4) and other parts aside.
10. Remove the four screws (1), the hinge pin brackets (2)
and the hinge pin insert from the bottom right side of
the freezer door.
22
1 MFL67855601 Eng.indd 22 2013.7.25 8:51:41 AM