Kenmore Elite 795.7802 Series Use & Care Manual page 13

NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator through a
narrow opening, if it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with a 1/8in. Alien wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 in. Alien wrench.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle
footprints over the mounting fasteners and tightening
the set screws with a 1/8 in. Alien wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 in. Alien wrench.
When assembling or disassembling the handles:
* Grasp the handle firmly to ensure it will not drop or
cause injury.
* Prevent the handle from swinging toward nearby
people or animals.
* insert the bracket hole of the handle into the stopper
bolt of the door exactly, then assemble the set screws
to fix the handle in place.
* Check for any gap between the door and handle after
the handle is fixed in place.
13
1 MFL67855601 Eng.indd 13 2013.7.25 8:51:23 AM