Reversing Doors And Handles (Drawer Model) - Kenmore Elite 795.7802 Series Use & Care Manual

Bottom freezer
Hide thumbs Also See for Elite 795.7802 Series:
Table of Contents

Advertisement

REVERSING
REFRIGERATOR
DOORS
(For Freezer Drawer
Models)
Electrical Shock Hazard
Before you begin, either unplug the refrigerator
or turn
off power at the circuit breaker or fuse box. Failure to
do so could result in death or serious injury.
Remove food and any adjustable
door or utility bins
from doors. Failure to do so could result in serious
injury.
Reversing Doors
You may find it more convenient
to have the doors open
from the right, rather than from the left as installed
by the
factory.
The "right side" referred
to in the directions
is the
side on your right as you face the front of the unit.
1. Remove the top hinge cover screws (1). Remove the
cover(2) by lifting the hidden hook inside the bottom of
the front side of the cover, with a fiat-head
screwdriver.
t1!? t
TOOLS NEEDED
* 10mm or 13/32-inch
socket wrench (with 2-inch
extension for bottom door hinge)
" No. 2 Phillips head screwdriver
" 1/4 inch socket wrench
" Flat-head
screwdriver
for prying
" Adjustable
wrench
2. Using a 10mm or 13/32-inch
socket wrench, remove
the three bolts and lift off the top hinge. Set parts
aside.
_, CAUTION:
When removing the bolts, be careful that
the door does not fail forward.
3. Lift the door from the middle
hinge pin and remove the
door.
_, CAUTION:
Place the door, inside facing up, on a
non-scratching
surface.
17
1 MFL67855601
Eng.indd
17
2013.7.25
8:51:32
AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents