Accessories; Optional Features (Field Installed) - Lincoln Electric SAE-300 Operator's Manual

C-1
OPTIONAL FEATURES
GENERAL OPTIONS
WARNING
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc
welder for pipe thawing is not approved by the
CSA, nor is it recommended or supported by
Lincoln Electric.
------------------------------------------------------------------------
Power Plug Kit K802D
A power plug kit for the auxiliary power receptacles is
available. (Provides a plug for each receptacle.)
Spark Arrestor Kit K903-1
Includes a heavy gage steel, approved spark arrestor,
clamp and adapter for mounting to the muffler exhaust
pipe.
TRAILER K2636-1
For heavy-duty road, off-road, plant and yard use.
Includes pivoting jack stand, safety chains, and 13 in.
(330.2 mm) wheels. Stiff .120 in. (3.0 mm) welded rec-
tangular steel tube frame construction is phosphate
etched and powder coat painted for superior rust and
corrosion resistance. Low sway suspension gives out-
standing stability with manageable tongue
weight.Wheel bearings are packed with high viscosity,
high pressure, low washout Lubriplate
Includes a Duo-Hitch™– a 2 in. (50.8 mm)
Ball/Lunette
Eye combination hitch. Overall width: 60 in. (1.5 m)
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
Stainless Steel Sheet Metal Kit K2423-1
Stainless steel roof and doors. Also includes decals
(mounted), door latches, door hooks, bumpers and all-
required mounting hardware. Fits K6090-9 and -10
Pipeliner ® 200D and K1643-1 thru -10 Classic
STICK OPTIONS
ACCESSORY SET K704
Includes 35 feet (10 m) of electrode cable and 30 feet
(9 m) of work cable, headshield, work clamp and elec-
trode holder. Cable is rated at 500 amps, 60% duty
cycle.
Remote Control Kit K924-4
Contains remote control rheostat and 100 ft. (30.5 m)
cable for adjusting the OCV at the welding site.

ACCESSORIES

(Field Installed)
® grease.
® 300D
SAE-300
TIG OPTIONS
TIG Module K930-2
Provides high frequency and shielding gas control for
AC and DC GTAW (TIG) welding applications. Its
compact case is designed for easy carrying, complete
with a handle. High frequency bypass is built in.
Additionally, the K936-3 control cable is required if
remote control is used. If remote control is not used
the K936-4 control cable is required.
PTA-26V TIG Torch K1783-9
Air cooled 200 amp torch equipped with valve for gas
flow control. 25Ft. length.
Magnum Parts Kit For PTA-26V TIG Torch KP509
Control Cable K936-4 (required for TIG Module)
Control cable for connecting the K930-2 TIG Module.
Arc Start Switch K814 (required for TIG Module)
Comes with a 25ft.(7.6m) cable.
Attaches to the TIG torch for convenient finger control.
Contactor Kit K938-1 (required for TIG Module)
Provide "Cold" tungsten Tip when welding with the
TIG Module.
Control Cable Extension K937-45
Allows the TIG Module to be operated at distances up
to 200 ft. from the power source.Available in 45 ft.
(13.7m).
®
C-1