Lincoln Electric SAE-300 Operator's Manual page 18

C-2
WIRE FEEDER OPTIONS
Wire Feed Module K623-1
Provides constant voltage (CV) output with improved
arc stability for Innershield welding. Excellent for MIG
welding. Recommended wire feeders are the LN-7,
LN-23P and LN-25.
Remote Control Kit K2464-1
(Stick & Wire)
For machines that have the wire feed module.
Contains a rheostat for stick output, a potentiometer
for wire output and 100 ft. (30 m) of control cable.
LN-25 PRO Wire Feeder K2613-1
Portable CC/CV unit for flux-cored and MIG welding
with MAXTRAC ® wire drive system. Includes Gas
Solenoid & Internal Contactor. Requires Wire Feed
Module.
®
Magnum 350 Innershield Gun for LN-25 K126-12
For self-shielded wire with 15 ft. (4.5m) cable. For
.072"(1.9mm) (5/64" (2.0mm) wire.
®
Magnum PRO 350 Ready-Pak
15 ft., .035-5/64 in.
Magnum PRO MIG/flux-cored welding guns are rated
®
100% duty cycle. The guns are designed for high
amperage, high duty cycle applications in extreme
environments where heat-resistance and fast service-
ability are key.
Drive Roll and Guide Tube Kit (for LN-25 PRO)
KP1697-068 for .068-.072 in. (1.8 mm)
KP1697-5/64 for 5/64 in. (2.0 mm)
For cored or solid steel wire.
®
Magnum 300 MIG Gun and Cable Package LN-25
PRO K1802-1 (includes K466-1 Connector Kit)
For .035-.045 in. (0.9-1.2 mm) gas-shielded wire with
15 ft. (4.5 m) cable.
Drive Roll and Guide Tube Kit (for LN-25 PRO)
KP1696-1
For .035 in. and .045 in. (0.9 mm and 1.1 mm) solid
steel wire.
ACCESSORIES
®
K2652-2-10-45
SAE-300
Magnum Spool Gun K487-25
Hand held semiautomatic wire feeder requires SG
Control Module. 25 ft. length.
SG Control Module K488 (For Magnum Spool Gun)
The interface between the power source and the
spool gun. Provides control of wire speed and gas
flow.
Input Cable K691-10 ( For SG Control Module)
For Lincoln engine drives with 14-pin MS-type con-
nection, separate 115V NEMA receptacle and output
stud connections. 10 ft. length.
®
C-2