Engine Service Chart - Lincoln Electric SAE-300 Operator's Manual

Lincoln electric welder user manual
Table of Contents

Advertisement

D-3
EVERY DAY OR EVERY 8 HOURS
FIRST SERVICE - (20 / 50 HOURS)
EVERY 100 HOURS OR 3 MONTHS
EVERY 250 HOURS OR 6 MONTHS
Notes:
(1) Consult Engine Operators Manual for oil recommendations.
(2) Consult Engine Operators Manual for additional maintenance schedule
information.
(3) Fill slowly! Ensure correct quantity is used.
Above operations to be carried out by trained personnel with reference to the
workshop manual where necessary .
These preventative maintenance periods apply to average conditions of
operation. If necessary use shorter periods.
MAINTENANCE
ENGINE SERVICE
EVERY 500 HOURS OR 12 MONTHS
EVERY 1000 HOURS
ENGINE SERVICE (NOTE 2)
MAINTENANCE ITEM
Coolant level
Concentration of antifreeze
Coolant (NOTE 3)
Engine oil level (NOTE 1)
Engine oil (NOTE 1 & 3)
Engine oil filter
Drain water separator & fuel strainer
Water separator element
Fuel filter canister
Tension of alternator drive belt
Alternator drive belt wear
Alternator drive belt
Air filter (earlier check may be req'd)
Air filter element
Renew the engine breather
Tighten cylinder head
Valve clearances
Electrical systems
All nuts and bolts for tightness
Injector performance
Leaks or engine damage
Battery
I = Inspect
C = Clean
TYPE OR QUANTITY
50/50 Water/Ethylene Glycol
9.5qt., 9.0L
8.45qt., 8L (refill amount)
Perkins #140517050
Lincoln #M20840-A
Perkins #130366120
Perkins #080109107
Donaldson #P821575
Intake .008", exhaust .008"
Contact P erkins
R = Replace
SAE-300
®
D-3
S26354 VM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents