Lincoln Electric SAE-300 Operator's Manual page 30

Lincoln electric welder user manual
Table of Contents

Advertisement

E-7
PROBLEMS
(SYMPTOMS)
White or Blue Smoke.
Dark Grey Smoke.
Faulty Charging.
Starter Motor does not run.
Engine Protection Light not com-
ing on.
No Auxiliary Power
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
TROUBLESHOOTING
Observe all Safety Guidelines detailed throughout this manual
POSSIBLE
1.
Excess engine oil.
2.
Too low viscosity of the engine
oil.
3.
Faulty injection timing.
1.
Unsuitable fuel.
2.
Excess injection.
3.
Faulty function of the engine.
4.
Overloading.
5.
Clogged air cleaner.
1.
Loose fan belt.
2.
Faulty wiring.
3.
Faulty battery.
4.
Worn out alternator brush.
1.
Loose or damaged wiring.
2.
Drained voltage from battery.
3.
Damaged
(including solenoid).
1.
Broken Light Bulb.
2.
Faulty light wiring.
3.
Faulty Engine Control Unit.
1.
Open circuit breakers.
Reset breaakers.
2.
GFCI may have tripped.
Follow "GFCI Testing and
Resetting Procedure" in the
Maintenace Section of this
Manual.
3.
Faulty connections to auxiliary
receptacles.
Check connections
CAUSE
starter
motor
CAUTION
SAE-300
®
RECOMMENDED
COURSE OF ACTION
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.
E-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents