Battery Charge - Panasonic KX-TG2631C Operating Instructions Manual

TG2631C_2632C(e).book Page 11 Wednesday, January 25, 2006 3:05 PM
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2
Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover.
B
A
Important:
L Use only the rechargeable Panasonic
battery noted on page 5.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.

Battery charge

Place the handset on the base unit or
charger for 6 hours before initial use.
While charging, "Charging" is displayed
and the CHARGE indicator on the base
unit lights. When the battery is fully
charged, "Charge completed" is
displayed.
Base unit:
OR
L Model shown is KX-TG2631.
Preparation
11