TG2631C_2632C(e).book Page 32 Wednesday, January 25, 2006 3:05 PM
Programming
Feature
Ring count
Ringer tone (Handset)
Ringer volume (Handset)
Set dial mode
*6
Set flash time
*7
Set line mode
*8
Time adjustment
(Call Display subscribers only)
Voice enhancer
Voice prompt
(Voice guidance language)
*1 If you subscribe to Call Display service and want to view the caller's information after
lifting up the handset to answer a call, turn off this feature.
*2 KX-TG2632
*3 This tone lets you know when you receive a call while you are on an intercom call. If you
select "On", the tone sounds repeatedly for as long as the line rings. If you select "2", the
tone only sounds 2 times.
*4 You can select whether or not key tones are heard when keys are pressed. Includes
confirmation tones and error tones.
*5 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you select a
melody, you cannot distinguish lines by their ringers.
*6 The flash time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary.
*7 Generally, the line mode setting should not be adjusted. If "Line in use" is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to "A".
*8 This feature allows the unit to automatically adjust the date and time setting when caller
information is received. To use this feature, set the date and time first.
32
Feature
Setting code
code
{2}–{7}: 2–7 rings <4>
{0}{6}{1}
{0}: Toll saver
*5
{1}–{3}: Tone <1>–3
{1}{2}
{4}–{7}: Melody 1–4
{1}: Low {2}: Medium
{1}{1}
{3}: <High> {0}: Off
{1}: Pulse {2}: <Tone>
{0}{5}{1}
(page 16)
{1}: <700ms> {2}: 600ms
{0}{5}{2}
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
{1}: A {2}: <B>
{0}{5}{3}
{1}: <Caller ID[auto]>
{0}{9}
{0}: Manual
{1}: On {0}: <Off>
{5}
{1}: <English>
{0}{8}{2}
{2}: Français (page 16)
System
setting
r
–
–
r
r
r
r
–
r