Panasonic KX-TG2631C Operating Instructions Manual page 49

TG2631C_2632C(e).book Page 49 Wednesday, January 25, 2006 3:05 PM
Problem
The 2nd caller's
information is not
displayed during an
outside call. (Visual Call
Waiting feature does not
function.)
*1 KX-TG2632
Answering system
Problem
I cannot listen to
messages from a remote
location.
The unit does not record
new messages.
I cannot operate the
answering system.
The message indicator
on the handset flashes.
*1 KX-TG2632
Cause/solution
L In order to use Call Display, Call Waiting, or Visual Call
Waiting, you must first contact your telephone company
and subscribe to the desired service.
After subscribing, you may need to contact your
telephone company again to activate this specific
service, even if you already subscribed to both Call
Display and Visual Call Waiting services.
Cause/solution
L A touch tone phone is required for remote operation.
L Enter the remote code correctly (page 37).
L The answering system is off. Turn it on (page 38).
L The recording time is set to "Greeting only". Select
a different setting (page 39).
L The message memory is full. Erase unnecessary
messages (page 35).
L If you subscribe to the Voice Mail service, messages
are recorded by the telephone company not your
telephone (page 39).
L Someone is operating the answering system.
L If someone is talking on a conference call, you cannot
operate the answering system. Try again later.
L New messages have been recorded. Listen to the new
messages (page 35).
Useful Information
*1
49