Table of Contents
Advertisement
TG2631C_2632C(e).book Page 48 Wednesday, January 25, 2006 3:05 PM
Useful Information
Phonebook
Problem
Copying stopped with an
*1
item displayed.
*1 KX-TG2632
Call Display
Problem
The handset does not
display the caller's name
and/or phone number.
I cannot dial the phone
number edited in the
caller list.
48
Cause/solution
L The destination handset may have lost communication
with the base unit, or the destination unit user may have
pressed {C} or {s}.
The displayed phonebook item was not copied to the
unit. Press {OFF}. Confirm that the destination unit is
not in use and try again.
Cause/solution
L You have not subscribed to Call Display service.
Contact your telephone company to subscribe.
L If your unit is connected to any additional telephone
equipment such as a Call Display box or cordless
telephone jack, disconnect the unit from the equipment
and plug the unit directly into the wall jack.
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
L The name display service may not be available in some
areas. Contact your telephone company for details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 25).
L If a call is being transferred to you, the caller information
*1
is not displayed.
L The phone number you dialed might have an incorrectly
edited pattern (for example, the long distance "1" or the
area code is missing). Edit the phone number with
another pattern (page 28).
Advertisement
Table of Contents
