Related Manuals for Ness RKP
Summary of Contents for Ness RKP
- Page 1 N e s s RadIo KeyPad R K P R A D I O K E Y PA D Installer ManUal Ness Radio Keypad – Installation and Programming Manual REV 5.1...
-
Page 2: Programming Manual
Ness. Ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of ongoing product development and improvement. - Page 3 Portable - carried from room to room, kept in a up to 15 user Codes can be programmed in vehicle, bedside table. the RKP . the Id for each code can be mapped to a compatible Ness control panel to report * Receivers are sold separately.
-
Page 4: Installation
RKP body Battery compartment forward. 9V Lithium • If the RKP is being wall mounted; screw the back housing to the wall using the four mounting holes provided. Beeper • At this stage, the RKP body can be hand held to insert the 9V battery as part of the powering up process. -
Page 5: Operation
2 button transmits a 4th Button signal Press hoME [coDE] E on user Code 2. this function is only suitable for the Ness MCR or shortcut hoME E (if P62e 3e is enabled). receiver. (Shortcut Home Mode is transmitted as RKP User Code 1). -
Page 6: Typical System
Codes aRe tRaNsMItted as useR 1. all useR Codes aRe INdIVIdually tRaNsMItted. Note 1: only RKP user Id 1 needs to be 'learned' by the Note 1: all RKP user Ids must be individually 'learned' panel. It can be learned to any panel user slot from 2–56. -
Page 7: To Exit Program Mode
ProgrammIng the rkP PRogRaMMing oPtions notE: the RKP will automatically drop the RKP program options on page 12 in the out of user or Installer Program Mode to Ness Radio Keypad. operating Mode 3 minutes after the last key press. - Page 8 14 Radio Keys to a d8x or d16x control panel. the RKP and the control panel are now ready for use. the RKP will arm and disarm the panel via the Radio Code programmed. What is a ‘LEaRn MEssagE’?
-
Page 9: Program Options
P09E sEnD UsER iDs the site Code is the encrypted security code this option enables the transmission of that the RKP transmits to the panel along with individual user Ids to the control panel. the button press data. By entering P10e 0000e, the site Code is... -
Page 10: Operation Shortcuts
P62E 7E oFF: 3 button operation disabled (low Battery light oN) (low Battery light oFF) (P62E 7E must be OFF when the RKP is used P62E 7E on: 3 button operation enabled with D24 V1.1 and earlier). (low Battery light oN) (P62E 7E must be ON when the RKP is used with D24 V1.1 and earlier). - Page 11 Program oPtIons table RKP oPtion DEscRiPtion DEFaULt P09e send user Ids P09e 1e-15e sent learn Message for codes 1 to 15 P10e enable Radio encryption P11e user Code 1 (Master Code) P12e user Code 2 P13e user Code 3 P14e...
-
Page 12: Specifications
2 (to MCR Receiver) audible indicator ....... onboard beeper for feedback: keypress, valid command, error. Visual indicators ....... ValId led: indicates program modes, valid signal. loW BatteRy led: indicates RKP low battery, option enabled (pro- gram mode). Battery ........9V lithium (ultralife u9Vl) Quiescent current draw ....
Need help?
Do you have a question about the RKP and is the answer not in the manual?
Questions and answers