Using An Optional Remote Control (#) - Nikon D90 User Manual

Using an Optional Remote Control (#)

Use the optional ML-L3 remote control for self-portraits (pg. 241) or to operate the
camera remotely.
D
Before Using the Remote Control
Before using the remote control for the first time, remove the clear plastic battery insulator
sheet.
1
Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a stable, level surface.
h
2
Select " or # mode.
Press the I button and rotate the main command dial to select one of the
following modes:
" Delayed remote
# Quick-response remote
The camera will enter stand-by mode. At default settings, single frame or
continuous mode will be restored if no operations are performed for about a
minute.
3
Frame the photograph.
Frame the photograph. If autofocus is in effect, the camera shutter-release
button can be used to set focus, although only the shutter-release button on
the remote control can be used to release the shutter.
68
Main command dial
I button
Mode
Shutter released about 2 s after remote shutter-release
button is pressed.
Shutter released when remote shutter-release button is
pressed.
Control panel
Description