Nikon D90 User Manual page 64

2
Choose an autofocus mode.
Press the B button and rotate the command
dial until one of the following autofocus modes
is displayed in the monitor (note that these
autofocus modes differ from those available in
s
other shooting modes):
Mode
Face
8
priority
Wide area
9
(default)
Normal
!
area
3
Check the view in the monitor.
To magnify the view in the monitor and check focus, press the X button.
Press X to zoom in up to a maximum of 6.7 ×, or press W to zoom out. While
the view through the lens is zoomed in, a navigation window will appear in a
gray frame at the bottom right corner of the display. Use the multi selector to
scroll to areas of the frame not visible in the monitor. Press the J button to
start recording (pg. 50).
A
Monitor Brightness
Monitor brightness can be adjusted by pressing the K button while the view through the
monitor is displayed. Press 1 or 3 to adjust brightness (note that monitor brightness has no
effect on pictures taken in live view mode). To return to live view, release the K button.
44
Description
The camera automatically detects
and focuses on portrait subjects
facing the camera. Use for portraits.
Use for hand-held shots of landscapes
and other non-portrait subjects. The
focus point can be selected using the
multi selector.
Use for pin-point focus on a selected
spot in the frame. A tripod is
recommended.
X button
B button Main command
dial
Exit
Monitor
Exit