Nikon D90 User Manual page 124

❚❚ Copying White Balance from d-0 to Presets d-1–d-4
Follow the steps below to copy a measured value for white balance from d-0 to any
of the other presets (d-1–d-4).
1
Select L (Preset manual).
Highlight Preset manual in the white balance
menu (pg. 95) and press 2.
2
Select a destination.
t
Highlight the destination preset (d-1 to d-4)
and press the W button.
3
Copy d-0 to the selected preset.
Highlight Copy d-0 and press J. If a comment
has been created for d-0 (pg. 107), the comment
will be copied to the comment for the selected
preset.
A
Choosing a White Balance Preset
To select another white balance preset in the Preset manual menu (see
Step 3, above), press 1 to highlight the current white balance preset
(d-0– d-4) and press 2.
104
W button