Insert The Battery - Nikon D90 User Manual

4
Remove the battery when charging is complete.
Charging is complete when the CHARGE lamp stops
blinking. Remove the battery and unplug the charger.

Insert the Battery

1
Turn the camera off.
Always turn the camera off before inserting or
removing batteries.
2
Open the battery-chamber cover.
Open the battery-chamber cover on the bottom of the
camera.
3

Insert the battery.

Insert the battery as shown at right.
4
Close the battery-chamber cover.
❚❚ Removing the Battery
Before removing the battery, turn the camera off. To prevent short-circuits, replace
the terminal cover when the battery is not in use.
Power switch
X
23