INTELIA
7.13. Gear motor
Unscrew the screws shown and
remove the fi nger protection.
Unscrew
the screws as illustrated and remove the front panel to
access the screws which fi x the dispenser cover into place.
Only for Intelia Cappuccino remove the plug body along with pitcher
Saeco International Group
Lift the top cover.
Unscrew the screws in the front cover and lift
it off the milk jug plug body from the place
Unscrew the screws (highlighted) and
release the milk jug plug body assembly
Rev. 02 / September 2012
07 DISASSEMBLY
Unscrew the screws shown
and slide out the left side
body.
Slide out the fork as illustrated.
Page
/ 11
07