Flexible Hose To Inlet; Dust Hood, Arm Assembly, & Flex Hose - Craftex CT126 Owner's Manual

CT126 Portable Dust Collector
Assemble The Flexible Hose to Inlet
Place hose clamp (2) over hose (1) and
slide hose over the inlet. Fix hose to inlet
by tightening hose clamp screw (3).
Fig. 3
Dust Hood, Arm Assembly and Flex Hose
A. Assemble dust hood (1) to "L" bracket (2)
using 2-carriage bolts (3) and 2 hex nuts
(4).
B. Assemble dust hood and "L" bracket to the
arm bracket (5) and fix together using lock
handle (6).
C. Insert arm bracket (5) into the
corresponding end of the arm support (8)
and lock into place using the arm support
clamp (7).
D. Inset the other end of the arm support into
the bracket welded to the dust collector
impeller housing. Lock into place using the
second arm support clamp.
E. Place hose clamp (10) over hose (9) and
slide hose over the dust hood (1). Fix hose
to dust hood by tightening hose clamp
fixing screw.
Fig. 4
Assembly
Fig. 3
Fig. 4
8