Remote Control - Panasonic VieraLink SC-ALL30T Operating Instructions Manual

Remote control

1
2
INPUT
3
SETUP SOUND
4

1 [Í] Turn the main unit on or off (
2 [INPUT] Select the input source (
3 [SETUP] Select the setup menu (
4 [SOUND] Select the sound menu
( 21, 22)
5 [ -PAIRING]
≥ Select the Bluetooth
source ( 16)
≥ Bluetooth pairing (
®
≥ Disconnecting a Bluetooth
6 [j VOL i] Adjust the volume of this system
( 16)
7 [MUTE] Mute the sound (
8 [4][OK][3] Select and confirm the option
∫ Before using for the first time
Remove the insulation sheet A.
≥ Dispose of the insulation sheet responsibly
after removing it.
5
6
7
8

OK
16)
16)
23)
device as the
®
19)
device ( 20)
®
16)
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)


≥ Set the button-type battery with its (i) mark
facing upward.
∫ About remote control signal sensor
The remote control signal sensor is located
on the main unit.
≥ Use the remote control within the correct
operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30 left and right
o
B Remote control signal sensor

7
SQT0936