Table of Contents
Advertisement
Quick Links
Thank you for purchasing this product.
Please read these instructions carefully before using this product,
and save this manual for future use.
Included Installation Instructions
The installation work should be done by a qualified installation specialist. (
Before commencing work, carefully read these installation instructions and the operating instructions
to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this system.)
Model number suffix "EB" denotes UK model.
EB
EG
GN GW
Operating Instructions
Home Theater Audio System
Model No. SC-HTB700
12 to 15)
TQBM0483
Advertisement
Table of Contents
Related Manuals for Panasonic SC-HTB700
Summary of Contents for Panasonic SC-HTB700
- Page 1 Operating Instructions Home Theater Audio System Model No. SC-HTB700 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions The installation work should be done by a qualified installation specialist. (...
-
Page 2: Safety Precautions
CAUTION Unit ≥ Do not place sources of naked flames, such as lighted Safety precautions candles, on this unit. ≥ This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please WARNING increase separation between this unit and the mobile telephone. ≥... -
Page 3: About Bluetooth
About Bluetooth ® Caution for AC Mains Lead (For the AC mains plug of three pins) Panasonic bears no responsibility for data and/or information that is compromised For your safety, please read the following text carefully. during a wireless transmission. -
Page 4: Table Of Contents
≥ The illustrations shown may differ from your unit. ≥ These operating instructions are applicable to model SC-HTB700 for variety of regions. Unless otherwise indicated, illustrations in these operating instructions are of the model for the United Kingdom and Ireland. -
Page 5: Control Reference Guide
Control reference guide This system (Front) Main unit (SU-HTB700) Active subwoofer (SB-HWA900) [Í/I] Standby/on switch (Í/I)* Display Touch to switch the unit from on to standby WIRELESS LINK indicator ( mode or vice versa. In standby mode, the unit * These switches work just by touching the is still consuming a small amount of power. - Page 6 This system (Others) Main unit (Bottom) Active subwoofer (Rear) AC IN ( ) terminal ( [I/D SET] I/D SET button HDMI AV OUT (TV (ARC)) terminal (ARC The main unit and the active subwoofer have already been paired at the time of purchase, so this button is not compatible) ( normally used.
- Page 7 ∫ Before using for the first time Remote control Remove the insulation sheet A. INPUT ≥ Dispose of the insulation sheet responsibly after SETUP SOUND removing it. ∫ To replace a button-type battery Battery type: CR2025 (Lithium battery) ...
-
Page 8: Step 1 Connections
Step 1 Connections Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. When connecting to 4K compatible equipment CAUTION and 4K Ultra HD TV, use High Speed HDMI (Caution regarding the HDMI terminals on cables which support 18 Gbps bandwidth. - Page 9 Connection with players, etc., supporting HDR10+ and Dolby Vision This system does not support HDR10+ and Dolby Vision . When connecting to a player, TV, etc., that supports HDR10+ or Dolby Vision , use the following connection. ≥ The name of the terminal may be different depending on the device that supports HDR10+. Refer to the operating instructions of the supporting device for details.
- Page 10 Connection from an HDMI Using the IR Blaster compatible device (When the remote control does not work properly) You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Depending on how the main unit is setup, it may Top Box, etc.
- Page 11 3 Aim the TV’s remote control at this AC mains lead connection system’s remote control sensor and operate the TV. ≥ Connect only after all other connections are completed. To a household mains socket ≥ For the location of the TV’s remote control signal sensor, refer to the operating instructions for the TV.
-
Page 12: Step 2 Placement
Take care not to damage the inside speaker unit. Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. - Page 13 When placing the main unit in a rack or on a table Additionally required accessories (commercially available) ≥ Fall prevention cord (diameter: 1.5 mm to 2.0 mm)..............k 2 ≥ Screw eyes (to attach the fall prevention cord) ................k 2 ≥...
- Page 14 When attaching the main unit to a wall The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 45 kg. The screws and other items are not supplied as the type and size will vary with each installation.
- Page 15 3 Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 200 mm of space above of the main unit to allow enough space for fitting the main unit. ≥...
-
Page 16: Step 3 Active Subwoofer Wireless Connection
Step 3 Active subwoofer wireless connection Preparation ≥ Turn on the main unit. 1 Press [BÍ CI]. Active subwoofer on/off button [BÍ CI] Use this button to turn the active subwoofer on and off. C I: The active subwoofer is on. The active subwoofer is off. -
Page 17: Using This System
Remote control code ^--- “BLUETOOTH”(----} Select the Bluetooth device as ® When other Panasonic devices respond to this -PAIRING] the source. ( system’s remote control, change the remote control code on this system and the remote ≥ This remote control cannot be used to control the control. -
Page 18: Bluetooth ® Operations
Follow the step below if, for example, a “PAIRING” is indicated on the display. connection has been made to any device other than the Bluetooth device you want to connect ® 3 Select “SC-HTB700” from the Bluetooth device’s Bluetooth menu. ® ®... -
Page 19: Sound Menu
Sound menu ∫ CLR DIALOG You can change the level of dialogue clarity when 1 Press [SOUND] repeatedly to select you want to emphasise people’s voices, etc. the sound effect and then press [OK]. Of the levels “LEVEL 1” to “LEVEL 4”, the effect increases the higher the level number. -
Page 20: Setup Menu
Setup menu ∫ WALL MOUNT Select the appropriate speaker placement mode 1 Press [SETUP] repeatedly to select to suit your placement method. This system will adjust the sound effect according to the the setup item and then press [OK]. placement mode setting. ≥... - Page 21 USB device. After that, touch [Í/I] on the main unit to turn it off, then touch [Í/I] again to turn it on. Occasionally, Panasonic may release updated firmware for this system that may add or improve the way a feature operates. These updates are available free of charge.
-
Page 22: Linked Operations With The Tv (Viera Link "Hdavi Control Tm ")
HDMI CEC cannot be guaranteed. ≥ This unit supports “HDAVI Control 5” function. What is VIERA Link “HDAVI “HDAVI Control 5” is the standard for Panasonic’s HDAVI Control compatible equipment. This standard is compatible Control”? with Panasonic’s conventional HDAVI equipment. - Page 23 VIERA Link “HDAVI Control 3” or later and the VIERA Link is set to on. The setting causes a sound delay of approximately 0.04 seconds when connected to a Panasonic TV (VIERA) with VIERA Link (HDMI) version 2 or earlier or a TV from another manufacturer.
-
Page 24: Troubleshooting
Troubleshooting Reference The remote control does not work properly. ≥ The battery is depleted. Replace it with a new Before requesting service, make the following one. ( checks. If you are in doubt about some of the ≥ It is possible that the insulation sheet has not check points, or if the solutions indicated in the been removed. - Page 25 ® jWhile the main unit and the TV are connected audio output to “SC-HTB700” manually. Read the with the HDMI cable, turn on the TV and then operating instructions for the device for details.
- Page 26 Sound stops. The power of the main unit turns off ≥ If the main unit is connected to a Panasonic TV automatically. and turned on using the remote control or the (When the main unit detects a problem, a safety...
- Page 27 Active Subwoofer Main unit displays No power. “F61” Ensure the AC mains lead of the active subwoofer ≥ There is a problem with the amplifier of the is connected properly. system. ≥ Disconnect the AC mains lead and consult the dealer.
- Page 28 “USB OVER CURRENT ERROR” The USB device is drawing too much power. ≥ Disconnect the USB device. After that, turn off the main unit and then switch it on again. ≥ Turn the main unit off and then on again. “LOAD FAIL”...
-
Page 29: Unit Care
≥ When cleaning the top surface (A) of the main States and other countries. unit, wipe left and right along the line. HDAVI Control is a trademark of Panasonic Corporation. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. -
Page 30: Specifications
Specifications GENERAL AMPLIFIER SECTION RMS OUTPUT POWER (non-simultaneous drive) Power consumption FRONT SPEAKER (L/R) Main unit 41 W 42 Wi42 W Active subwoofer 48 W (1 kHz, T.H.D. 10.0 %, 8 Ω, 20 kHz LPF) Standby FRONT SPEAKER (Centre) 42 W Main unit (1 kHz, T.H.D. - Page 31 FORMAT SECTION WIRELESS SECTION Wireless module HDMI AV input Frequency Range LPCM (Max 7.1 ch) Dolby Digital 2.40335 GHz to 2.47735 GHz Dolby TrueHD No. of channels Dolby Digital Plus Dolby Atmos ® ® DTS-ES Discrete 6.1 Bluetooth SECTION ® DTS-ES Matrix 6.1 96/24 ®...
- Page 32 Português Eesti keel Declaração de Conformidade (DoC) Com o presente documento, a “Panasonic Corporation” declara que este Vastavusdeklaratsioon (DoC) produto se encontra em conformidade com os requisitos específicos e Käesolevaga kinnitab “Panasonic Corporation”, et see toode vastab demais especificações referentes à Diretiva 2014/53/UE.
- Page 33 Clienţii pot descărca o copie a DoC-ului original al produselor Izjava o skladnosti (DoC) noastre RE de la adressa noastră DoC din Internet: “Panasonic Corporation” v tem dokumentu izjavlja, da je izdelek v skladu z http://www.ptc.panasonic.eu bistvenimi zahtevami in drugimi pomembnimi določbami Direktive 2014/53/EU.
- Page 34 Deklaracija o podobnosti (DoC) Uygunluk Beyanı (DoC) Ovime „Panasonic Corporation” izjavljuje da ovaj proizvod udovoljava “Panasonic Corporation” bu belge ile bu ürünün 2014/53/EU Direkti’nin temel osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU. gerekliliklerine ve diğer ilgili hükümlerine uygun olduğunu beyan eder.
- Page 35 If there is a major failure in regard to the product which cannot be remedied then you must no fy us within a reasonable period by contac ng the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of me from receiving no ce from you.
- Page 36 ≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com. ≥ Most major credit and debit cards accepted. ≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK. ≥ It couldn’t be simpler! ≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.