Panasonic VieraLink SC-ALL30T Operating Instructions Manual page 32

"FAIL"
Setting has failed. Read the instructions and try
again.
"LINKING"
≥ This system is trying to connect to the last
connected Bluetooth
"BLUETOOTH" is selected.
≥ This system is communicating with the
wireless router to complete the network
settings.
Depending on the wireless router this process
may take a few minutes. Try moving this
system closer to the wireless router.
"NO CONNECT"
This system cannot connect to the network.
Check the network connection. (
"REMOTE " (" " stands for a number.)
The remote control and this system are using
different codes. Change the code on the remote
control. ( 16)
"WIRED LAN"
Connection to the network is via a wired LAN
connection.
≥ When setting up wireless connection, disconnect the
LAN cable from this system.
"WIRELESS LAN OFF"
The wireless LAN function on this system is
disabled.
≥ When setting up wireless connection, set the
"WIRELESS LAN" setting to "ON". (
"WAIT"
≥ This is displayed, for example, when this
system is turning
off.
≥ This is flashing when the system is trying to
enter a
network setting mode.
" " blinks
≥ This may occur when, for instance, the
network connection is interrupted.
32
SQT0936
device when
®
12)
24)