Setup Menu - Panasonic VieraLink SC-ALL30T Operating Instructions Manual

Hide thumbs Also See for VieraLink SC-ALL30T:
Table of Contents

Advertisement

Setup menu

1 Press [SETUP] repeatedly to select
the setup item.
2 Press [4] [3] repeatedly to select
the desired setting and then press
[OK].
Dims the display after
5 seconds of inactivity.
DIMMER
ON
OFF
A beep sounds when you
touch the switch on the main
unit or when you turn the unit
on/off.
BEEP
≥ This works during muting as
well.
ON
OFF
The main unit automatically is
turned off if there is no audio
input and when you do not
use it for approx. 20 minutes.
ON
OFF
≥ When this is set, the display
shows "P.OFF 1" to indicate
that the main unit will turn
off in approximately 1
minute.
≥ If "BLUETOOTH
AUTO POWER
STANDBY", "VIERA LINK"
DOWN
or "NET STANDBY" is set to
"ON", this function will also
be set to "ON". To change
the setting, set
"BLUETOOTH STANDBY",
"VIERA LINK" and "NET
STANDBY" to "OFF".
(
– "AUTO POWER DOWN" is not
indicated on the display when
"BLUETOOTH STANDBY",
"VIERA LINK" or "NET
STANDBY" is set to "ON".
23, 24)
Sets the volume limit to 50
when you turn on the main
unit although the volume is
VOL
set to above 50 before it is
LIMITATION
turned off.
ON
OFF
This function allows you to
connect a paired Bluetooth
device when the main unit is
in standby mode.
ON
OFF
BLUETOOTH
The main unit will be turned
STANDBY
on automatically when you
connect a paired Bluetooth
device.
≥ If this function is set to
"ON", the standby power
consumption will increase.
Change the transmission
mode to prioritise
transmission quality or sound
quality. Make sure that the
Bluetooth
connected ("BLUETOOTH
LINK MODE
READY" is indicated on the
display).
MODE 1: Emphasis on
connectivity.
MODE 2: Emphasis on sound
quality.
Turn on the VIERA Link
function.
ON
OFF
Select "OFF" when your
HDAVI Control device does
not work correctly with this
VIERA LINK
system.
≥ ARC will be disabled.
Connect an optical digital
audio cable.
≥ Turn off all connected
devices and then turn them
on again after changing the
setting.
You can add SC-ALL2 (sold
separately) to this system as
REAR
rear surround speakers.
PAIRING
≥ For details, refer to "Rear
surround" (
®
®
device is not
®
25)
23
SQT0936

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents