Panasonic VieraLink SC-ALL30T Operating Instructions Manual page 20

Connecting a paired
Bluetooth
®
1 Press [ -PAIRING] to select
Bluetooth mode.
®
2 After confirming that "BLUETOOTH
READY" is indicated on the display,
select "SC-ALL30T" from the
Bluetooth device's Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
Press and hold [ -PAIRING] until the
"BLUETOOTH READY" is indicated on the
display.
≥ When "BLUETOOTH" is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth device. If the connection attempt
®
fails, try to establish a connection again.
≥ This system can only be connected to one device at a
time.
≥ To change the sound quality, refer to "LINK MODE".
( 23)
≥ When enjoying video contents with this function, the
video and audio output may not be synchronised.
One-Touch Connection
(Connecting by NFC)
For NFC-compatible Bluetooth
(Android devices) only
TM
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
on the main unit, you can complete all
preparations, from registering a Bluetooth
device to establishing a connection.
Preparation
≥ Turn on the NFC feature of the device.
≥ Android device version lower than 4.1
requires the installation of the app "Panasonic
Music Streaming" (free of charge).
1
Enter "Panasonic Music Streaming" in the search
box of Google Play
"Panasonic Music Streaming".
2
Start the app "Panasonic Music Streaming" on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the app.
20
SQT0936
device
®
device
®
devices
®
device
®
to search, and then select
TM
1 Press [
"BLUETOOTH".
2 Touch and hold your device on the
NFC touch area of the main unit [ ].
(
Do not move the Bluetooth
displays a message or reacts in some way.
Once the Bluetooth
device away from the main unit.
≥ When the registration and connection of the
Bluetooth
connected device is indicated on the display for a
few seconds.
≥ The location of the NFC touch area differs
depending on the device. When a connection
cannot be established even if your Bluetooth
device has touched the NFC touch area of the main
unit, change the position of the device or main unit.
The condition may also improve if you re-download
the dedicated app "Panasonic Music Streaming"
and start it up.
3 Start playback on the Bluetooth
device.
≥ If you touch another device to the main unit, you can
update the Bluetooth
connected device will be disconnected automatically.
≥ When the connection is established, playback may start
automatically depending on the type of device being
used.
≥ The One-Touch Connection may not work properly
depending on the type of device being used.
®
-PAIRING] to select
6)
device until it beeps,
®
device has reacted, move the
®
device is complete, the name of the
®
connection. The previously
®
®
®