Remote Control - Panasonic SC-HTB880 Owner's Manual

Remote control

1
2
INPUT
3
SETUP
4

1 Turn the main unit on or off (
2 Select the input source (
"TV" --# "BD/DVD" --# "AUX"
^-----"BLUETOOTH"(------}
3 Select the setup menu (
4 Select the sound menu (
5 Select the Bluetooth
( p. 21)
6 Adjust the volume on this system (
7 Mute ( p. 21)
8 Select and confirm the option
∫ About remote control signal sensor
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.
Distance: Within approx. 7 m (23 ft) directly in front
Angle: Approx. 30
o
For table top layout
B Remote control signal sensor for table top layout
C Remote control signal sensor for wall mounting layout
8
RQT9903
SOUND

OK
p. 21)
p. 21)
p. 24)
p. 22)
device as the source
®
p. 21)
left and right
∫ Before using for the first time
Remove the insulation sheet A.
5
6
∫ To replace a button-type battery
7
Battery type: CR2025 3V (Lithium battery)
8


≥ Set the button-type battery with its (i) mark
facing upward.

For wall mounting layout
