Setup Menu - Panasonic SC-HTB880 Owner's Manual

Setup menu

Press [SETUP] repeatedly to select
the setup item.
Press [3, 4] repeatedly to select
the desired setting and then press
[OK].
Dims the display after
5 seconds of inactivity.
DIMMER
ON
OFF
The main unit is
automatically turned off if
AUTO there is no audio input and
POWER when you do not use it for
DOWN approximately 20 minutes.
ON
OFF
Sets the volume limit to 50
when you turn on the main
unit although the volume is
VOL
set to above 50 before it is
LIMITATION
turned off.
ON
OFF
This function allows you to
connect a paired
Bluetooth
the main unit is in standby
mode.
BLUETOOTH
ON
STANDBY
OFF
The main unit will be
turned on automatically
when you connect a paired
Bluetooth
24
RQT9903
device when
®
device.
®
Change the Bluetooth
connection link mode to
suit the connection type.
Make sure that the
Bluetooth
LINK connected ("PAIRING" or
MODE "BLUETOOTH READY" is
indicated on the display).
MODE 1: Emphasis on
connectivity.
MODE 2: Emphasis on
sound quality.
Turn on the VIERA Link
function.
ON
OFF
Select "OFF" when your
HDAVI Control device does
VIERA not work correctly with this
LINK system. ARC will be
disabled. Connect an
optical digital audio cable.
Turn off all connected
devices and then turn them
on again after changing the
setting.
Select the appropriate
speaker placement mode
to suit your placement
method. This system will
adjust the sound effect
according to the placement
mode setting.
SPEAKER ON TABLE-AUTO or ON
PLACEMENT WALL-AUTO: Setting will
be automatically changed
depending on the
placement method.
ON TABLE: For table top
layout
ON WALL: For wall
mounting layout
≥ The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.
®
device is not
®