Table of Contents
Advertisement
CHARGING YOUR DPP-450
The DPP-450 uses a Lithium Ion rechargeable battery pack. Before first use,
the battery pack should be charged for at least (4) hours from full empty.
To prevent electrical damage to the DPP-450 and/or battery pack, please use
approved AC adaptors cables only.
Connect 24V charger cable to the DC charging jack as shown below. Insert cable to
DC jack to start charging.
When the device is turn on (holding turn on/off button), the LCD display will show
"CHG" text and a green led "CHARGE" is blink.
Solid RED = charging
Solid GREEN = fully
charged (~4 hrs.)
W arning:
When charging the DPP-450, only use the approved/recommended 24 volt @
•
5 amp DC adaptors. Failure to do so may cause charging problems and
potential damage to the DPP-450.
When connecting the DC charging cable, take care as to not force the plug into
•
the connector as doing so may cause damage to the connector.
1
USER MANUAL
|
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DPP-450 and is the answer not in the manual?