Table of Contents
Advertisement
FAQ
1 Q.) One of the motors is not spinning.
A.) Make sure that the white cogs on the underside of the
motor housing are connected and moving properly. This
may require gently pressing in the small cog attached to the
motor to ensure that the cogs are aligned correctly.
2 Q.) I cannot attach a USB cable to the camera.
A.) To transfer videos and photos to a computer, please use
the Micro SD card reader included.
3 Q.) The Alpha Drone/Transmitter LEDs keep flashing.
A.) The battery in the Alpha Drone or the Transmitter is
running low. In either case it is advisable to switch off both
devices and restart with fresh/charged batteries.
4 Q.) The drone will not hover in one place.
A.) Try trimming your Alpha Drone using the fine-tuning
buttons to counter any instability (Note: The Alpha Drone
will become slightly less stable when running low on battery)
5 Q.) What is the word?
A.) The Bird. The Bird is the word.
6 Q.) Footage is jumpy/grainy.
A.) Kaiser Baas reccomends that a class 10 SDHC micro SD
card, with a capacity of 32GB or lower, is used to capture
footage.
26
Advertisement
Table of Contents
