Flight Equipment Your Drone Share your footage with us on social media Remote Control Transmitter #KBdiscover Remote Control Screen Set Up To view the entire Kaiser Baas Flight Planning product range visit: Pairing Tips www.kaiserbaas.com Flight Basics 360° Flip Filming Basics...
Page 3
Always maintain Visual Line-of-Sight (VLOS) physical or mental that could impair the Pilot’s Kaiser Baas website for the most up to date version with the Drone. Above all, maintain a safe distance from people ability to fly responsibly and within the boundaries of this guide: www.kaiserbaas.com/support.
Alpha Drone any closer than Do not leave your battery unattended • Lithium Polymer batteries are extremely 5.5km to any airfield, or any closer than •...
Flight Equipment Your Drone 4 x Rotor blade guards 2 x Landing feet Rotor Blade Guards SD Card slot 4 x Spare rotor blades 1 x USB battery charger Feet Battery Hatch 1 x Drone battery 1 x Screwdriver Lights Power Switch Camera Rear Profile...
Rotation fine-tuning level Motor power level turn back on once charging is complete to the Alpha Drone and insert the Micro SD (to avoid shortening battery life, do not card* into the allocated slot. remove the battery from charge until charge sequence is complete).
Take-off Preparation Pair the Remote Control Transmitter and Alpha Drone. Turn on your Alpha Drone and place it on stable ground. Ensure the Alpha Drone is facing away from you (black rotor blades and downwards facing white LED lights indicate the front of the drone).
Alpha Drone, try turning Stand at least 2 metres away from your the drone off and on again Alpha Drone before deployment. OR the battery in the Alpha Drone is low. Deploy! Charge the battery. Elevation / Descent...
Page 10
Control Transmitter. The Alpha Drone There are LED lights on the underside will start up in the lowest sensitivity level of the Alpha Drone that indicate when the 25% responsiveness (advised level for Alpha Drone is operational (constant) or learners). Pressing the High/Low button...
Flip button! extreme in any direction, the drone will flip accordingly. Please note the Control of the Alpha Drone can be trimmed sensitivity is increased and this mode using the fine-tuning buttons on the The drone will launch forward and is for advanced pilots.
Once a Micro SD card is inserted, the LED lights will shine a constant green. If the LED light does not shine a constant green, turn off the Alpha Drone, remove Note: You cannot take photos while and re-insert the Micro SD card.
Do not attempt to open the housing of sure not to over-tighten. If the screw will from the running rotors. your Alpha Drone, as this will void your not fasten correctly, remove it and ensure warranty and may impede the operation the hole in both the blade and rod are of your Alpha Drone.
32GB or lower, is used to capture footage. 2. The Alpha Drone/Transmitter LEDs keep flashing Motors: 4 X 3.7V, 2.5-2.6A, 12000rpm The battery in the Alpha Drone or the Transmitter Battery: 6 X AA (not included) Remote Control Transmitter is running Screen: LCD Display low.
Kaiser Baas Support Got a question about your Kaiser Baas Drone? Live Chat: www.kaiserbaas.com/support Email: helpdesk@kaiserbaas.com For further information please visit: www.kaiserbaas.com...