Table of Contents
Advertisement
Indicators
There are LED lights on the underside of the Alpha Drone
that indicate when the Alpha Drone is operational (constant)
or when the Alpha Drone is running low on battery
(flashing). It is important to pay attention to the indicators
to avoid an uncontrolled landing, potentially putting your
drone and its surrounds at risk.
Modes
The Mode switch swaps the Yaw and Pitch controllability on
the thumb sticks.
High/Low
There are four sensitivity levels for the Alpha Drone that can
be cycled through by using the High/Low button on the
Transmitter.
These sensitivity levels increase and decrease the overall
responsiveness of the thumb sticks on the Transmitter.
The Alpha Drone will start up in the lowest sensitive level
25% responsiveness (advised level for learners). Pressing
the High/Low button once will enter the medium sensitivity
level 50% responsiveness. The Transmitter will beep twice
and indicate the sensitivity on the Motor Power indicator.
Pressing the High/Low button again the Transmitter will
beep three times and show the high responsiveness setting
of 75% on the Motor Power indicator.
Pressing the High/Low button a third time will assign
the highest sensitivity level which will be indicated by
four beeps and the Motor Power indicator displaying
100% responsiveness. The 100% Motor Power mode is for
advanced pilots. This mode also enables 360° flips. Please
refer to the 360° Flips section for further information.
18
Advertisement
Table of Contents
