Table of Contents
Advertisement
Pressing the High/Low button again will return the
sensitivity level to the lowest setting.
Trimming (fine tuning)
Control of the Alpha Drone can be trimmed using the fine-
tuning buttons on the Transmitter. If the Alpha Drone is
drifting off during a hover or other flight manoeuvre, these
buttons are used to counter this drift. The calibration is
displayed on the display screen of the transmitter. You will
see the trimming levels displayed in the fine-tuning bars
on the display which will show in which direction the drone
controls have been trimmed. To reset all trimming and
calibration, hold the Reset button for five seconds.
19
Advertisement
Table of Contents
