Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kaiser Baas Delta
Summary of Contents for Kaiser Baas Delta
- Page 1 DELTA DRONE ELECTRONIC GIMBAL USER GUIDE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Features What’s in the box? Installation Instructions Operation Instructions Re-calibration /kaiserbaas Tag us & share the love. Contact Us Need help? www.kaiserbaas. com/support For the full Kaiser Baas product range visit www.kaiserbaas.com... -
Page 3: Features
This page is updated frequently Hero 3™, 3+™ & Hero 4 Silver/ with product information, Black™. upgrades and additions to the Whilst in use, the Delta Drone User Guide. Gimbal allows the Pilot to achieve smooth, optimised Kaiser Baas reserves the right to footage. -
Page 4: What's In The Box
INSTALLATION INSTRUCTIONS Step 1. • Delta Drone Gimbal • 2 x Landing Gear Stabilisers Fix the Gimbal Mounting Plate to the underneath of the Delta • Screws Drone with two screws and the Allen Key Set. • Combined Data & Power... - Page 5 Step 2. Step 3. IMPORTANT! Make sure the Attach a compatible GoPro™ camera to the Gimbal frame Drone battery is disconnected using the bracket and two more before connecting the Gimbal. screws. Ensure it is fastened correctly and securely. Connect the Data & Power Cable to the Drone.
- Page 6 Gimbal Control Unit. Stabilisers Snap the included Landing Gear Stabilisers to the bottom of each landing leg. These extensions help to stabilise the Delta Drone during take-off and landing, counteracting the increased weight from the attached camera and the Gimbal itself.
-
Page 7: Operation Instructions
From here, you can control the Gimbal are powered-on, correctly Gimbal’s pitch via the Gimbal Dial installed, with the camera still on the Delta Drone Transmitter. attached. The Gimbal Dial allows you to Step 6. Place the Drone on a control the vertical pitch of the level surface. - Page 8 Step 7. PRESS the Gimbal Gimbal shudder at the six second calibration button (located at mark. the rear of the Gimbal Mounting RELEASE the calibration button Plate). and CONTINUE to HOLD the The Gimbal motors should lose Gimbal steady for an additional power and go limp.
-
Page 9: Contact Us
11.1V, 3S LI-PO) visit: Operating 500mA-600mA www.kaiserbaas.com/support current (related to Or email: voltage and motor power) helpdesk@kaiserbaas.com -15°~-65° C Working For the full Kaiser Baas product temperature range visit Sensors Three-axis www.kaiserbaas.com gyroscope and accelerometer Control 0.02° accuracy Control range Pitch - 1 3 .5°~90°,Roll...
Need help?
Do you have a question about the Delta and is the answer not in the manual?
Questions and answers