Install Utilities; Windows Nt Installation With Networking Installed; Installation Under Service Pack - 3Com 6000 User Manual

Install Utilities

Windows NT
Installation with
Networking Installed
Installation Under
Service Pack 4
1 Read the Welcome page and click Next.
2 Read the Software License Agreement and click Yes. (If you click No, the
installation stops.)
3 Select a destination folder for the software files and click Next.
4 In the Setup Type window, select the type of installation for the software:
Typical—Installs the software and documentation.
Compact—Installs the software, but not documentation.
Custom—Allows you to choose the components to install.
5 Follow the directions in the Select Program Folder window and click Next.
6 In the Desktop Icon Option window, click Yes.
7 In the Setup Complete window, click Finish.
8 If you are prompted to restart your computer, do so.
This completes the basic installation. To confirm the installation, see "Confirming
the Installation" on page 34.
The following procedure is for installing the card software when networking is
already installed on your computer. If networking is not already installed, see
"Windows NT Installation Without Networking Installed" on page 57.
The CardWizard utility, which helps Windows NT to load and manage software,
must be installed. If the installation program does not detect the CardWizard
utility on your computer, it will ask whether you want to install it. If you already
have a similar utility installed, you must first uninstall that utility to prevent
conflicts with CardWizard.
Internet Explorer version 4 is required to view help files. It is recommended that
you install Internet Explorer version 5 or later.
It is recommended that you upgrade to the latest service pack. If you are using
Service Pack 4, you must install CardWizard before inserting the PC Card into the
computer. Follow this procedure:
1 Put the 3Com CD in the CD-ROM drive.
2 If the 3Com 11 Mbps WLAN Menu appears, click Exit.
3 From the Windows Start menu, select Start/Run.
4 In the run dialog box, type the path to the CardWizard installer on the 3Com CD.
For example: d:\cw\disk1\setup.exe
5 Follow the prompts to install CardWizard.
At the prompt to restart, shut down the computer.
6 Insert the PC Card, restart the computer, and continue with the installation.
Refer to "Installation Under Service Pack 5 and Above" for detailed instructions.

Windows NT Installation with Networking Installed

31