Resetting The Operating Hours Counter For The Charcoal Filter; Disposing Of The Charcoal Filter - Miele DA 420V-6 Operating And Installation Instructions

Rangehood
Table of Contents

Advertisement

Cleaning and care
When to change the NoSmell active
charcoal filter
 Always replace the charcoal filter
when it no longer absorbs kitchen
odours effectively.
It should, however be replaced at
least every 6 months.
The charcoal filter operating hours
counter  will light up to remind you to
change the charcoal filter regularly.
 The charcoal filter operating hours
counter needs to be activated before
using for the first time (see "Opera‐
tion").
Resetting the operating hours coun‐
ter for the charcoal filter
After changing the charcoal filters, the
operating hours counter needs to be re‐
set.
 To do this, with the fan switched on,
press the operating hours control
 twice, then press it again and
hold it for approx. 3 seconds until on‐
ly the 1 is flashing. The charcoal filter
symbol  will go out.
If you replace the charcoal filter before
the operating hours counter has
reached its maximum:
 Press the operating hours control
 twice and hold it for approx. 6
seconds until only the 1 is flashing.

Disposing of the charcoal filter

 The used charcoal filter can be dis‐
posed of with the normal household
waste.
30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Da 424v-6Da 424v-6 ext

Table of Contents