Resetting The Charcoal Filter Operating Hours Counter; Disposing Of The Charcoal Filters; Reactivatable Charcoal Filters - Miele DAS 4630 Operating And Installation Instructions

Hide thumbs Also See for DAS 4630:
Table of Contents

Advertisement

Fitting/Replacing the charcoal filters
The matching frames must be installed
in order to use the charcoal filters.
Follow the directions on the
installation sheet.
 Remove the grease filter from the
rangehood.
 Remove the charcoal filter packaging.
 Push the charcoal filters into the
frames until they engage firmly.
 Refit the grease filter.
 To remove the charcoal filters, press
the tab forwards slightly and pull the
filters down to remove them.
Cleaning and care
When to change the NoSmell active
charcoal filters
Replace the charcoal filters when they
no longer absorb kitchen odours
effectively, or at least every 6 months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be
reset.
 Touch the charcoal filter control  for
approx. 3 seconds with the
rangehood switched on until only the
indicator light for level 1 is flashing.
The charcoal filter symbol  goes out.

Disposing of the charcoal filters

 Used charcoal filters can be disposed
of with the normal household waste.

Reactivatable charcoal filters

Reactivatable charcoal filters are
available for this rangehood. They can
be used several times after being
reactivated in the oven.
Please follow the operating instructions
supplied with the filter.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Das 4930

Table of Contents