Miele DA 420 V EXT Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Ventilation Hood
  5. DA 424 V EXT
  6. Operating and installation instructions
Miele DA 420 V EXT Operating And Installation Instructions

Miele DA 420 V EXT Operating And Installation Instructions

Operating and installation instructions cooker hoods
Hide thumbs Also See for DA 420 V EXT:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and installation instructions
Cooker hoods
DA 420 V, DA 420 V EXT
DA 424 V, DA 424 V EXT
en - GB
To avoid the risk of accidents
or damage to the appliance
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 09 200 980

Advertisement

Table of Contents
loading

Related Manuals for Miele DA 420 V EXT

Summary of Contents for Miele DA 420 V EXT

  • Page 1 Operating and installation instructions Cooker hoods DA 420 V, DA 420 V EXT DA 424 V, DA 424 V EXT en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

  • Page 2: Table Of Contents

    Miele|home ........
  • Page 3 Operation with DSM 400 control module ......34 Potential free connection ......... 34 Connection to a light switch .

  • Page 4: Caring For The Environment

    Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Packaging e.g. cling film, polystyrene and plastic wrappings must be kept out of the reach of babies and young children.

  • Page 5: Warning And Safety Instructions

    The cooker hood is not intended for outdoor use. Any other usage is not supported by the manufacturer and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. This appliance is not intended for...

  • Page 6: Technical Safety

    The manufacturer cannot be held liable for unauthorised work. Faulty components must only be replaced by genuine Miele original parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
  • Page 7 These models may only be combined with a Miele external motor. This appliance must not be used in a non-stationary location (e.g. on a ship). In areas which may be subject to...
  • Page 8 Warning and Safety instructions In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heating appliance are in operation simultaneously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible.

  • Page 9: Correct Use

    Correct use Never use an open flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the cooker hood could draw flames into the filter. Fat particles drawn into the cooker hood present a fire hazard.

  • Page 10: Correct Installation

    Safety regulations prohibit the fitting of a cooker hood over solid fuel stoves. All ducting, pipework and fittings must be of non-flammable material. These can be obtained from the Miele Spare Parts department or from builders' merchants. The appliance must not be connected to a chimney or vent flue which is in use.

  • Page 11: Modes Of Operation

    The cooker hood works with . . . air extraction: The air is drawn in, cleaned by the grease filters and directed outside. The cooker hood is fitted with a non-return flap, which is closed when the cooker hood is switched off. No exchange of room air and outside air can take place.

  • Page 12: Guide To The Appliance

    Guide to the appliance...

  • Page 13: Guide To The Appliance

    Cover plate Telescopic tower Canopy The canopy is not designed to be used as a shelf. Grease filters Charcoal filter Available as an optional accessory for recirculation mode (DA 420 V only) Recirculation grille (only for recirculation mode on the DA 420 V) Controls Hob lighting...

  • Page 14: Miele|Home

    , available as an optional extra, enables the operation of the cooker hood to be automatically controlled by the operating status of a Miele electric hob with onset controls. For communication to take place, the hob must be fitted with the appropriate...

  • Page 15: Use

    To switch the fan on ^ Press the On/Off touch control. The fan runs at power level "II". The indicator lamp will come on. To select a power level ^ Use the – / + controls to select the power level required. Touch control + = higher setting Touch control –...

  • Page 16: Run-On Option

    The indicator lamps for fan power levels I and IV will flash if the automatic switch-off of the Intensive setting is not activated. ^ Press the + touch control to activate automatic switch-off. The indicator lamps for fan power levels I and IV will now light up constantly.

  • Page 17: To Switch The Lighting On

    To switch the lighting on The hob lighting can be switched on and off independently of the fan. ^ Briefly press the lighting touch control to switch on the hob lighting. The indicator lamp will come on. The lighting will switch on at maximum brightness.

  • Page 18: Filter Operating Hours Counter

    Filter operating hours counter The number of hours the appliance has been in operation is stored in memory. The indicator lamp for the grease filter touch control will come on after 30 hours of operation. The grease filters must then be cleaned. Afterwards, the filter operating hours counter must be reset.
  • Page 19 Filter operating hours counter You can set the operating hours counter to suit the type of cooking you – Select a short time if you roast or fry a lot. – If you use very little fat for cooking, select a longer time. –...
  • Page 20 Setting and altering the charcoal filter operating hours counter (with recirculation mode) The charcoal filter is needed for recirculation mode. The cooker hood is set at the factory for extraction mode. On delivery, the operating hours counter for the charcoal filter is set to unlimited. For recirculation mode, the operating hours counter needs to be set to the required time:...

  • Page 21: Adjusting The Height Of The Canopy

    Adjusting the height of the canopy The height adjustment feature on the canopy can be used to – – adapt the height of the hood to suit the installation conditions. – adjust the working area underneath the hood to the height of the user. –...

  • Page 22: Cleaning And Care

    Cleaning and care A range of Miele branded cleaning and conditioning agents are available to order through your Miele Dealer / Chartered Agent, the Miele Spare Parts Department, or via the internet on www.miele-shop.com. Before carrying out any cleaning or maintenance work, disconnect the cooker hood from the mains supply.

  • Page 23: Grease Filters

    Controls The controls may suffer discolouration or damage if soiling is left on them for too long. Remove soiling straight away. Observe the General notes on cleaning earlier in this section. Do not use stainless steel cleaning agents on the controls. Cleaning and care Grease filters Re-usable metal filters are fitted which...
  • Page 24 Make sure that the spray arm can move freely. ^ Do not wash at more than 65° C. If a Miele dishwasher is being used, select the Sensor wash programme. ^ Use a mild dishwasher detergent. Depending on the cleaning agent...

  • Page 25: Fitting And Replacing The Charcoal Filter

    It is fitted in the canopy above the grease filters. New filters can be purchased from your Miele Dealer / Chartered Agent or from the Miele Spare Parts Department. See back cover for contact details, and "Technical data" for the model number of the filter.

  • Page 26: Changing A Halogen Lamp

    Cleaning and care Changing a halogen lamp ^ Before any cleaning or maintenance work, disconnect the cooker hood from the mains supply. Exercise caution when changing halogen lamps. They get very hot during use and remain hot for some time after being switched off. Let them cool down before you change them.

  • Page 27: After Sales Service

    In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – Your Miele Dealer / Chartered Agent – The Miele Service Department (see back cover for address). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.

  • Page 28: Appliance Dimensions

    Appliance dimensions DA 420 V (Ceiling fixing viewed from above) DA 424 V (Ceiling fixing viewed from above) 1) Cut-out for feeding through the exhaust ducting, the mains cable and, with ... EXT models, the connection cable to the external motor In recirculation mode, only the mains cable is required.

  • Page 29: Safety Distance Between Hob And Cooker Hood (S)

    – 650 mm above gas hobs and cookers. If this cooker hood is installed above a Miele Wok CS 1028 CombiSet appliance, a minimum safety distance of 760 mm must be maintained between the burner and the lower edge of the cooker hood.

  • Page 30: Installation

    Installation Before installation, it is important to read the information given on the following pages as well as the "Appliance dimensions" and the "Warning and Safety instructions" at the beginning of this booklet. This is particularly crucial when using the cooker hood at the same time as a heating appliance that relies on oxygen from the same room to avoid the danger of toxic...

  • Page 31: Extending Or Limiting The Adjustment Range

    Extending or limiting the adjustment range The height range for the appliance can be extended or limited by moving the limit switch. It may be necessary to do this if – the distance between the hob and the canopy when it is lowered is less than the minimum safety disance required.
  • Page 32 Installation ^ Loosen the top limit switch. ^ If a greater safety distance "S" between the canopy and the hob is required , raise the canopy until the required safety distance has been reached. ^ If a greater adjustable range is required , lower the canopy.

  • Page 33: Electrical Connection

    All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations. (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable.

  • Page 34: Operation With Dsm 400 Control Module

    Operation with DSM 400 control module The Miele DSM 400 control module can be used to combine the cooker hood with other components. It enables the following: Potential free connection This can be used to operate a further appliance via the On/Off button s on the cooker hood.

  • Page 35: Connection For Air Extraction

    Important: To avoid the danger of toxic fumes, please observe the Warning and Safety instructions. This is especially crucial when using the cooker hood at the same time as another heating appliance which relies on air from the same room. The cooker hood should be installed according to local and national building regulations.

  • Page 36: Condensate Trap

    Connection for air extraction – If the exhaust air is to be ducted into the open air, the installation of a telescopic wall vent or roof vent is recommended. – If the exhaust air is to be ducted into a vent flue, the ducting must be directed in the flow direction of the flue.

  • Page 37: Silencer

    Silencer (optional accessory) To achieve even further reductions in noise levels, a special silencer can be fitted in the ducting system... Connection for air extraction ...with air extraction: The silencer not only reduces noise from the fan, but also sounds from outside (e.g.

  • Page 38: Technical Data

    DA 420 V....42 kg DA 420 V EXT ....38.8 kg DA 424 V.
  • Page 40 Alteration rights reserved / 3011 M.-Nr. 09 200 980 / 00...

Table of Contents