Charcoal Filters; Resetting The Charcoal Filter Operating Hours Counter; Disposing Of Charcoal Filters - Miele DA 3668 Operating And Installation Instructions

Charcoal filters

With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Charcoal filters are available to order via
the Miele Webshop, the Miele Spare
Parts Department (see end of this
booklet for contact details) or from your
Miele dealer.
The type of charcoal filter required is
listed under "Technical data" at the
back of this booklet.
Fitting/replacing charcoal filters
The slots for the charcoal filters are
located above above the grease filters.
 Remove the cover. It is held in
position by magnets.
 Take the charcoal filters out of their
packaging.
 Insert the charcoal filters in the slots.
 Replace the cover.
Cleaning and care
When to change the charcoal filters
Replace the charcoal filters when they
no longer absorb kitchen odours
effectively, and at least every 6 months.
The operating hours counter reminds
you to replace the charcoal filters
regularly (see "Cleaning and care" –
"Operating hours counter").
Resetting the charcoal filter
operating hours counter
After the charcoal filters have been
replaced, the operating hours counter
needs to be reset on the cooker hood
controls.
 With the fan switched on, press the
operating hours control  twice,
then hold it for approximately
3 seconds until only 1 is flashing.
The charcoal filter symbol  will go
out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
 Press the operating hours
control  twice and hold it for
approximately 6 seconds until only 1
is flashing.

Disposing of charcoal filters

 Used charcoal filters can be disposed
of with normal household waste.
35