Table of Contents
Advertisement
Cleaning and care
Fitting and replacing the
charcoal filter
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
This is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filters.
New charcoal filters can be
purchased from your Miele dealer,
from the Miele Spare Parts
Department or via the internet at
www.miele.shop.com.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^ Take the charcoal filter out of its
packaging.
^ Insert the charcoal filter into the back
of the charcoal filter frame, then push
up into the frame at the front.
When fitting for the first time:
^ Activate the Operating hours counter
(see "Operation").
22
Always replace the charcoal filter im-
mediately if
– the | lights up
or
– it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
Resetting the Charcoal filter
operating hours counter
After changing the charcoal filter, the
Operating hours counter needs to be
reset.
^ Whilst the fan is switched on, press
the Operating hours control l— for
approx. 3 seconds until only the 1 is
flashing.
The Charcoal filter symbol — goes out.
If you want to change the charcoal filter
before the operating hours counter has
reached its maximum,
^ Press the Operating hours control
l— for approx. 6 seconds until only
the 1 is flashing.
Advertisement
Table of Contents
