Resetting The Charcoal Filter Operating Hours Counter - Miele DA 7090 W Operating And Installation Instructions

Hide thumbs Also See for DA 7090 W:
Table of Contents

Advertisement

Cleaning and care
Always replace the charcoal filters im-
mediately if
– the Charcoal filter sensor | lights up
or
– they are no longer effective at
absorbing kitchen odours.
They should, however, be replaced at
least every 12 months.
Used charcoal filters can be disposed
of with normal household waste.
Resetting the Charcoal filter
operating hours counter
After replacing the charcoal filter, the
operating hours counter needs to be
reset.
^ Whilst the fan is switched on, touch
the Charcoal filter sensor | for
approx. 3 seconds until only the 1
sensor is flashing.
The Charcoal filter sensor | will go
out.
If you want to change the charcoal filter
before the operating hours counter has
reached its maximum:
^ Touch the Charcoal filter sensor |
for approx. 6 seconds until only the 1
sensor is flashing.
20

Advertisement

Table of Contents
loading

Table of Contents