Switching The Cooktop Lighting On/Off; Power Management - Miele DA 420V-6 Operating And Installation Instructions

Operation (manual mode)
Switching the cooktop lighting
on/off
The cooktop lighting can be switched
on and off and dimmed independently
of the fan.
 Press the lighting control  briefly to
switch it on or off.
The lighting will switch on at maximum
brightness.
 Press and hold in the cooktop light‐
ing control . The brightness will
gradually dim until you release the
control.
 Press and hold in the lighting control
 again to increase the brightness to
the level required and then release it.

Power management

The rangehood features a power man‐
agement system for switching off the
lighting and reducing the fan power set‐
ting automatically.
– If the Intensive setting is selected,
the fan will automatically switch to
setting 3 after 5 minutes.
– From settings 3, 2 or 1 the power will
be reduced by one setting after 2
hours and then in 30 minute stages
until the fan finally switches off.
– The cooktop lighting will switch off
automatically after 12 hours.
22
Switching power management on/off
 Switch off the fan and the lighting.
 Press the run-on control 515 for
approx. 10 seconds, until the 1 lights
up.
 Then press in turn,
– the lighting control ,
– then the "" touch control, and
– the lighting control  again.
If power management is switched on,
the 1 and IS indicators will light up con‐
stantly.
If it is switched off, 1 and IS will flash.
 Press "" to switch power manage‐
ment off.
The 1 and IS indicators will flash.
 To switch it on, press "".
The 1 and IS indicators will light up
constantly.
 Confirm the selection by pressing the
run-on control 515.
All the indicator lights will go out.
If you don't confirm your selection with‐
in 4 minutes, the rangehood will auto‐
matically revert to the previous setting.