Linking The Reader; Link Datalogic Rf Devices To Base; Power Off - Datalogic Gryphon GM44XX Quick Reference Manual

Linking the Reader

Linking the Reader

Link Datalogic RF Devices to Base

For RF devices, before configuring the interface it is necessary
to link the handheld with the base.
To link the handheld and the base, either press the trigger to
wake it, or simply mount into the base to wake up for opera-
tion. If the reader was previously linked to another base, you
must first scan the bar code before re-linking to the new
Unlink
base.
Unlink

Power Off

Scan the bar code below to shut off power to the handheld un-
til the next trigger pull.
PowerOff
16 Gryphon™ I GM44XX