Programming Mode - Datalogic Gryphon GM44XX Quick Reference Manual

LED and Beeper Indications
Indication
a
Green Spot
flashes
momentarily
Image
Capture
a Except when in sleep mode or when a Good Read LED Duration other than 00 is selected

Programming Mode

reader is in Programming Mode.
INDICATION
Label Programming
Mode Entry
Label Programming
Mode Rejection of
Label
Label Programming
Mode Acceptance of
Partial Label
Label Programming
Mode Acceptance of
Programming
40
Description
Upon successful read
of a label, the soft-
ware shall turn the
green spot on for the
time specified by the
configured value.
When ready to cap-
ture image
- The following indications ONLY occur when the
DESCRIPTION
A valid programming
label has been
scanned.
A label has been
rejected.
In cases where multi-
ple labels must be
scanned to program
one feature, this indi-
cation acknowledges
each portion as it is
successfully scanned.
Configuration
option(s) have been
successfully pro-
grammed via labels
and the reader has
exited Programming
Mode.
LED
N/A
Blue light flashes
2 times when
updating
LED
LED blinks
continu-
ously
N/A
N/A
N/A
Beeper
N/A
N/A
BEEPER
Reader sounds
four low fre-
quency beeps.
Reader sounds
three times at
lowest frequency
and current vol-
ume.
Reader sounds
one short beep at
highest frequency
and current vol-
ume.
Reader sounds
one high fre-
quency beep and
4 low frequency
beeps followed by
reset beeps.
Gryphon™ I GM44XX