Denon S-302 Service Manual page 23

Q Q
4.4. Change within the mode 3 7 6 3 1 5 1 5 0
Changes within modes are made by pressing the
In the laser on/off (CD/DVD) mode, laser on/off control is executed and the laser current is displayed.
For the CD laser
( : Off, CD laser, Stored data: mm.mm [mA], Current value: nn.nn [mA])
For the DVD laser
( : Off, DVD laser, mm.mm [mA], nn.nn [mA])
When there is no saved data for the DVD laser)
( : Off, DVD laser, nn.nn [mA])
To store the current value, press the button for "
select T23.
If the button is pressed while T23 is displayed, the current value is displayed at "mmmm" and stored in the EEPROM.
T E
L 1 3 9 4 2 2 9 6 5 1 3
( : Off, DVD laser, nn.nn [mA])
If the current value is over 100 mA, the 4th and 9th digit sections are used.
In the servo adjustment value display mode (See "Table 1 - Servo adjustment value display mode details")
(XX : Selection mode, n: Adjustment value (HEX))
For the adjustment values, 0's are added in front of the effective number of bytes.
(Ex.: If the value is 0x123 for 4-byte data, "00 00 01 23" is displayed.)
In the trace mode (error rate display) (See "Table 2 - Trace mode details")
(YY : Selection mode [71 to 94], F: When address and error rate not set, F is displayed.)
In the accumulated laser on time display
w w w
(Y : 1: CD, 2: DVD, nnnnnnn: Time [h]) If the current value is over 100 mA, the 4th and 9th digit sections are used.
To clear the accumulated laser on time, press the
" " appears at the fourth position, then press the
.
If the PLAY button is pressed while TB3 is displayed, the accumulated laser on time of CD and DVD is cleared.
When TB1 or TB2 is selected with the or
and buttons while the mode is set.
" appears at the fourth position, then press the or
x a o
button while the accumulated laser on time is displayed (TB1, TB2) until
y
or button to select TB3.
i
button, "nnnnnnn" is displayed as 0 so you can check.
http://www.xiaoyu163.com
8
button to
Q Q
3 7 6 3
u 1 6 3
.
23
http://www.xiaoyu163.com
9 2 4 9 8
1 5 1 5 0 8 9 2 4
m
c o
S-302
2 9 9
9 8 2 9 9