Denon S-302 Service Manual page 19

Q Q
SERVICE MODE 3 7 6 3 1 5 1 5 0
1. Aging Mode
1.1. preparation0
(1) Equipment used: Any one of DVD Karaoke Disc (containing more than 10 titles).
(ex : Heat run disc TDV-HR01)
(2) Unit setting : No spec other than the following procedure.
1.2. procedure
Perform aging of the DVD.
(1) Pressing the and buttons simultaneously, plug the AC cord into a power outlet. This sets the aging mode.
• Once the aging mode is set, press the FUNCTION button to switch the mode.
(After the display is put out at the switch, it selects.)
(a) To select the normal aging mode ... Start from (2)
(b) To select the error rate display mode ... Start from (8)
(2) Press the button and play all the tracks recorded on the disc.
(3) Both the " " and " " indicators light on the fluorescent display tube.
(4) When the button is pressed once with the tray open, titles 1 and 10 recorded on the disc are played.
(5) The " " indicator flashes and the " " indicator lights on the fluorescent display tube.
(6) Once playback is completed, open and close the tray and repeat the operation in step (3) or (4).
(7) If there is an error while in the aging mode, the error is displayed and the stop mode is set with the status at that time.
NOTE) The FUNCTION button on the main unit and the FUNCTION selector button on the remote control unit will not work
during the aging mode.
The ON/STANDBY buttons on the main unit and the remote control unit will not work during the aging mode.
(If the set's power is turned off, the DVD stops and the aging mode is canceled.)
T E
L 1 3 9 4 2 2 9 6 5 1 3
No. Error contents
1 Bad DIsc
2 Forcus Error
3 Read Error
4 Tracking Error
5 Tray Error
6 Navigation Pack Read Error
7 Cmmunication Error
w w w
.
http://www.xiaoyu163.com
FL display
x a o u 1 6 3
y
i
http://www.xiaoyu163.com
8 9
Q Q
3 7 6 3 1 5 1
c o
.
19
2 4 9 8 2
5 0 8 9 2 4 9 8 2
m
S-302
9 9
9 9