List Of Accessories - Polaris Automatic Gate Operators 500 Single User Manual

LIST OF ACCESSORIES

Solar Powered Battery Charger (20-Watt: RSP20) The solar panel charges
the 12 volt battery when AC power is not available.
One-Button Transmitter. The transmitter works as an input device allowing
the user to open or close the gate from a remote location. It has a range up to
100 feet.
Two-Button Transmitter. The two-button transmitter provides the capability
to remotely operate two separate devices such as two gates, or a gate and a
garage door opener. It has a range up to 100 feet.
Mini-transmitter. The mini-transmitter fits on a keychain and allows the user
to open or close the gate from a remote location. It has a range up to 100 feet.
Keypad. The keypad allows for entry by authorized guests informed of the
pre-set code. Entering the correct code causes the gate to open or close. The
access code can be easily modified.
Pin Lock. The pin lock replaces the clevis pin when mounting the gate
operator to the brackets. It helps to prevent theft of the gate operator from the
gate, while allowing quick release of the operator.
In-Ground Vehicle Sensor. The vehicle sensor is buried near the gate and
senses a vehicle that passes within its 12-foot range. Once detected, the gate
opens automatically.
Solenoid Gate Lock. The automatic gate lock provides an additional level of
security for the property. When the gate swings shut, the gate lock closes,
securing the gate in the closed position. The gate lock is powered from the
control box of the gate operator. The locking mechanism is a mechanical latch.
Magnetic Gate Lock. The automatic gate lock provides an additional level of
security for the property. When the gate swings shut, the gate lock closes,
securing the gate in the closed position. The gate lock is powered from an
external AC power source. The locking mechanism is magnetic.