Download
Share
Print this page
  1. Manuals
  2. Brands
  3. UNAVi Manuals
  4. Car Navigation system
  5. ENB-X1
  6. Installation manual

UNAVi ENB-X1 Installation Manual

Hyundai accent in-dash navigation diy
Hide thumbs

Advertisement

Quick Links

Download this manual
Hyundai Accent In-Dash Navigation
Information & Manual
.
CLASSFICATION
Installation Manual
Hyundai Accent In-Dash Navigation DIY Installation Guide
DIY Installation Guide
[Single CD Player Use Only]
MODEL: Hyundai Accent 2012
(Professional Use)
WWW.BUYUNAVI.COM
Copyright © 2012 UNAVI USA, Inc. All rights reserved.
.
MODEL
ENB-X1
.
DOCUMENT NO
BU No. 10
VERSION
PAGE
1
1.2
Date: 4/18/2012

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENB-X1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for UNAVi ENB-X1

Summary of Contents for UNAVi ENB-X1

  • Page 1 Hyundai Accent In-Dash Navigation DIY Installation Guide Hyundai Accent In-Dash Navigation DIY Installation Guide [Single CD Player Use Only] MODEL: Hyundai Accent 2012 (Professional Use) WWW.BUYUNAVI.COM Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.

  • Page 2: Main Components

     All ground wires provided must be connected to chassis ground. MAIN COMPONENTS (Not actual size, Items shown may vary) Accent fascia kit: - Fascia - Main LCD Panel w/Mounting Bracket Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 3 Mounting brackets (L & R) Trip interface board Control box + SD Card External speaker GPS antenna + Magnetic plate Bluetooth ant. board SD + USB interface cables SMART cable Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.

  • Page 4: Tools Required

    Power Drill  Unibit  Electrical Connectors & Tools - (Wire stripper, Crimper, T-Tap, etc.) Required Tools Pre-installation picture of non-navigation equipped models (Trim levels may vary) Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 5 Once the antenna has been positioned, route the antenna cable carefully to avoid damage. Position the GPS antenna in the center of the vehicle at the highest point with a clear view of the sky. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 6 (Apply protective tapes and take care not to damage and scratch the interior dash and its related parts) Carefully disconnect all connectors behind the panel assembly. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 7 Hyundai Accent In-Dash Navigation DIY Installation Guide Disassemble the following components from the factory fascia panel: Air vents (L/R), Fascia panel garnish, Hazard lamp switch assy., Mounting clips Assemble the removed components directly on to the UNAVI fascia kit as shown. Information & Manual Date: 4/18/2012...
  • Page 8 Hyundai Accent In-Dash Navigation DIY Installation Guide Remove the audio assembly after loosening the mounting screws (4EA). As the audio assembly is being pulled out, carefully disconnect all cables behind the unit. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 9 Hyundai Accent In-Dash Navigation DIY Installation Guide As shown, remove all screws securing the audio faceplate. Loosen the screws (Left 3EA, Right 3EA) and remove the mounting brackets. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 10 Gently pull back the sleeve of the Bluetooth antenna cable to disconnect it from the back of the audio faceplate. (Applies only to models equipped with the Bluetooth system) Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 11 Disconnect the ribbon cable (FCC) from the back of the faceplate. **Use Caution** Remove the screws (4EA) to disassemble the top cover of the head unit. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 12 Remove the screws hidden underneath the two openings marked in white circle. Front view of the audio head unit with faceplate removed. Remove the screws (6EA) securing the front bracket. (These screws will be reused) Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 13 (Do not disconnect the ribbon cable from the audio side and take care not to damage it) Assemble the Trip interface board onto the front replacement bracket piece as shown. (Use screws provided in the kit to mount the Trip interface board). Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 14 If the vehicle is equipped with the Bluetooth system, mount the Bluetooth antenna board behind the front replacement bracket using a double-sided tape. Slide in the ribbon connector through the bottom opening of the front replacement bracket. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 15 NEVER attempt to connect the ribbon cable to the Trip Interface Board like the picture shown above as it may cause permanent damage to the audio unit! Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 16 - Push the lock down to secure the cable *Please check after installation when the radio unit is powered on* Red LED lights on the circuit board will flash intermittently indicating data communication. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 17 Use remaining screws from the original bracket to mount the front replacement bracket onto the audio head unit. Screw under the two openings as shown and assemble the top cover. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 18 Hyundai Accent In-Dash Navigation DIY Installation Guide Screw on the replacement mounting brackets (Left & Right) as shown. Open the glove box and turn the dampers to disconnect it from the compartment. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 19 Use Unibit to drill a hole on the back of the glove box (about 3/4-inch) just wide enough for the SD/USB interface cables to slide through.**Proceed with Caution** Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 20 Run the interface cables through the drilled hole and assemble the glove box back together. Mount the control box inside the glove box using a double-sided tape or Velcro. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 21 Make sure the GPS receiver is mounted (rounded side up facing the sky) to a non-metallic panel or on front windshield glass. Route the antenna cable carefully to avoid damage. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 22 Connect the GPS antenna to the female connector labeled “GPS”. Connect the external speaker to the female connector labeled “BUILT-IN SPEAKER”. This speaker will allow sound output from the UNAVI system when the audio is in XM/Radio/CD/MP3/Bluetooth mode. Sound output from the system will use the factory speakers under “AUX” mode only.
  • Page 23 Choose a location closest to the driver side (exposed or hidden) and where it can be mounted from causing any obstructions to other components. Connect the 3-pin “TRIP” connectors (male & female) to each other. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 24 Ensure rest of the audio unit connectors and cables are plugged in. Check the cables are not being too tightly squeezed in the back of the audio unit. Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.
  • Page 25 Plug in the 5-pin connector to the circuit board as shown. [INSTALLATION COMPLETE] For additional support and information, please visit us at www.buyunavi.com Thank you for choosing UNAVI! Information & Manual Date: 4/18/2012 Copyright © 2012 UNAVI USA, Inc. All rights reserved.