Download
Share
Print this page
  1. Manuals
  2. Brands
  3. UNAVi Manuals
  4. Car Navigation system
  5. ENB-X2
  6. Installation manual

UNAVi ENB-X2 Installation Manual

Kia sorento 2014+
Hide thumbs Also See for ENB-X2:

Advertisement

Quick Links

Download this manual See also: Installation Manual
Kia Sorento In-Dash Navigation
Information & Manual
.
CLASSFICATION
Installation Manual
Kia Sorento In-Dash Navigation DIY Installation Guide
DIY Installation Guide
[Standard Radio Use Only]
MODEL: Kia Sorento 2014+
(Professional Use)
WWW.BUYUNAVI.COM
Copyright © 2013 UNAVI USA, Inc. All rights reserved.
.
MODEL
ENB-X2
.
DOCUMENT NO
BU No. 23
.
.
VERSION
PAGE
1
1.1
Date: 7/17/2013

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENB-X2 and is the answer not in the manual?

Questions and answers

Related Manuals for UNAVi ENB-X2

Summary of Contents for UNAVi ENB-X2

  • Page 1 PAGE Kia Sorento In-Dash Navigation DIY Installation Guide Kia Sorento In-Dash Navigation DIY Installation Guide [Standard Radio Use Only] MODEL: Kia Sorento 2014+ (Professional Use) WWW.BUYUNAVI.COM Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.

  • Page 2: Main Components

    MAIN COMPONENTS (Not actual size, Items shown may vary) Rear View Sorento fascia kit: - Fascia - Control keypad w/cable - Main LCD Panel w/Mounting Bracket Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 3 Control box + SD Card External speaker Ribbon (FPC) cable - SPARE GPS antenna + Magnetic plate Control box interface cable SMART cable XM antenna adapter Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.

  • Page 4: Tools Required

    Electrical Connectors & Tools - (Wire stripper, Crimper, T-Tap, etc.)  Hand Saw/Reciprocating Saw *  Heat Gun Required Tools Pre-installation picture of non-navigation equipped models (Trim levels may vary) Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.

  • Page 5: Gps Antenna Installation

    Once the antenna has been positioned, route the antenna cable carefully to avoid damage. Position the GPS antenna in the center of the vehicle at the highest point with a clear view of the sky. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 6 (Apply protective tapes and take care not to damage and scratch the interior dash and its related parts) Carefully remove the entire fascia panel and disconnect all plugs behind it. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 7 PAGE Kia Sorento In-Dash Navigation DIY Installation Guide Remove the center air vent ducts (L/R) as shown. Remove the audio assembly after loosening the mounting screws. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 8 Kia Sorento In-Dash Navigation DIY Installation Guide Saw off the plastic trims in the center dash along the dotted lines. (See next image) Image of the plastic dash trim pieces removed. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 9 Kia Sorento In-Dash Navigation DIY Installation Guide Trim off small layers of plastic indicated with two white arrows. Transfer the center two speed clips to the adjacent hole on both sides. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 10 PAGE Kia Sorento In-Dash Navigation DIY Installation Guide Remove the mounting brackets on each side. Screw on the replacement mounting brackets (Left and Right) as shown. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 11 Disconnect the ribbon cable (FCC) from the back of the faceplate ONLY. **Use Caution** Remove the screws (4ea) on the head unit to remove the top cover. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 12 (This step required only if applicable to disassemble the front bracket). Remove the screws hidden underneath the two openings marked in dotted circles. Remove the screws (5ea) securing the front bracket. (Image shown above may vary) Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 13 Assemble the Trip Interface board onto the front replacement bracket piece as shown. (Use screws provided in the kit to mount the Trip Interface board). Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 14 NEVER attempt to connect the ribbon cable to the Trip Interface Board like the picture shown above as it may cause permanent damage to the audio unit! Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 15 (Images shown on this page may vary) *Please check after installation when the radio unit is powered on* Red LED lights on the circuit board will flash intermittently indicating data communication. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 16 Open the glove box and turn the side tabs to disconnect it. Disconnect the damper from the glove box. (To completely remove the glove box, pull out the two pins in the back) Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 17 Use Unibit to drill a hole on the back of the glove box (about 3/4-inch) just wide enough for the SD/USB interface cables to slide through.**Proceed with Caution** Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 18 Kia Sorento In-Dash Navigation DIY Installation Guide Mount the control box inside the glove box using a double-sided tape or Velcro. Connect the GPS antenna to the female connector labeled “GPS”. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 19 Route the antenna cable carefully to avoid damage. Connect the external speaker to the female connector labeled “BUILT-IN SPEAKER” This speaker will allow sound output from the UNAVI system when the audio is in XM/Radio/CD/MP3/Bluetooth mode.
  • Page 20 Remove and reposition these cables off to the side. (Image shown chassis frame behind the dash below the air duct) Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 21 Connect the factory XM antenna cable to the other end of the XM antenna adapter. Connect the main factory audio cable (24-pin) to the SMART cable harness. Clear of any obstructing cables or components behind the dash panel. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 22 Plug in the 6-pin “TRIP POWER” connector to the Trip Interface board as shown. Plug in the 5-pin “TRIP PCB” connector to the Trip Interface board as shown. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 23 VERSION PAGE Kia Sorento In-Dash Navigation DIY Installation Guide Assemble the Unavi fascia kit onto the factory dash panel as shown. Install the silver (Bluetooth/MP3) trim cover on the front side of the panel assembly. Information & Manual Date: 7/17/2013...
  • Page 24 Plug in the 10-pin control keypad cable to the Trip Interface board as shown. (Images shown on this page may vary) Plug in the remaining cables to the back of the LCD panel as shown. Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 25 DOCUMENT NO ENB-X2 BU No. 23 Installation Manual VERSION PAGE Kia Sorento In-Dash Navigation DIY Installation Guide Assemble the center fascia panel onto the dash. [INSTALLATION COMPLETE] Information & Manual Date: 7/17/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.