Download
Share
Print this page
  1. Manuals
  2. Brands
  3. UNAVi Manuals
  4. Car Navigation system
  5. ENB-X2
  6. Installation manual

UNAVi ENB-X2 Installation Manual

Kia optima 2011+ in-dash navigation diy
Hide thumbs Also See for ENB-X2:

Advertisement

Quick Links

Download this manual See also: Installation Manual
.
.
.
CLASSFICATION
MODEL
DOCUMENT NO
ENB-X2
BU No. 16
Installation Manual
.
.
PAGE
VERSION
Kia Optima In-Dash Navigation DIY Installation Guide
1.1
1
Kia Optima In-Dash Navigation
DIY Installation Guide
[UVO Infotainment System Use Only]
MODEL: Kia Optima 2011+
(Professional Use)
WWW.BUYUNAVI.COM
Information & Manual
Date: 3/26/2013
Copyright © 2013 UNAVI USA, Inc. All rights reserved.

Advertisement

loading

Related Manuals for UNAVi ENB-X2

Summary of Contents for UNAVi ENB-X2

  • Page 1 Kia Optima In-Dash Navigation DIY Installation Guide Kia Optima In-Dash Navigation DIY Installation Guide [UVO Infotainment System Use Only] MODEL: Kia Optima 2011+ (Professional Use) WWW.BUYUNAVI.COM Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.

  • Page 2: Main Components

    (Not actual size, Items shown may vary) Rear View Optima UVO fascia kit: - Fascia - Bluetooth Antenna Port - Touch Sensor PCB - Main LCD Panel w/Mounting Bracket Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 3 Mounting brackets (Top & Bottom) Control box + SD Card Trip interface board External speaker GPS antenna + Magnetic plate SD + USB interface cables SMART cable Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.

  • Page 4: Tools Required

     Unibit *  Electrical Connectors & Tools - (Wire stripper, Crimper, T-Tap, etc.) Required Tools Pre-installation picture of non-navigation equipped models (Trim levels may vary) Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.

  • Page 5: Gps Antenna Installation

    Once the antenna has been positioned, route the antenna cable carefully to avoid damage. Position the GPS antenna in the center of the vehicle at the highest point with a clear view of the sky. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 6 (Apply protective tapes and take care not to damage and scratch the interior dash and its related parts) Remove the screws (2EA) once the panel cover is removed. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 7 Kia Optima In-Dash Navigation DIY Installation Guide Remove the screws (2EA) located on the bottom of the driver side panel assembly. Gently pull off the panel assembly as shown. (See next picture) Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 8 Carefully disconnect all connectors from the back of the panel. (Picture shown may vary based on vehicle trim levels) Image of driver side panel assembly removed. (Installation is the reverse of removal) Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 9 Use a panel remover to pull out the garnish surrounding the center fascia. Start from the top right-hand corner as shown and gently pull up. Image of center garnish removed. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 10 Remove the screws (4EA) to pull out the climate control assembly. Disconnect all connectors from the back. Remove the screw on top of the driver side right air vent. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 11 Pull out the driver side air vent panel as shown. Remove the mounting screws (6EA) to marked in white circles. Gently pull out the center fascia panel as shown. (Installation is the reverse of removal) Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 12 VERSION Kia Optima In-Dash Navigation DIY Installation Guide Carefully remove the air vent and white clips from the factory fascia panel… …and relocate it to the UNAVI fascia kit as shown. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 13 Kia Optima In-Dash Navigation DIY Installation Guide Remove the audio assembly after loosening the mounting screws (4EA). As the audio assembly is being pulled out, carefully disconnect all cables behind the unit. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 14 Gently pull the locking tab away from the Disconnect the ribbon cable (FCC) from the back of the audio faceplate ONLY. faceplate to release the ribbon cable. **Use Caution** Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 15 Loosen the screws (4EA) from the audio head unit top cover. Remove the top cover after loosening the screws. Remove the two screws as marked in black arrows shown above. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 16 [WARNING] This TRIP MODULE is designed for specific models. Improper use such as failure to follow instructions and use with incompatible radio will damage this module and the radio unit! Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 17 Kia Optima In-Dash Navigation DIY Installation Guide  When attaching the ribbon cable on all UVO systems, for those familiar with Unavi installs, note that it is wider and uses a different type of connector than the standard radio units.
  • Page 18 (Use screws provided in the kit to mount the Trip Interface board). Front view of the Trip Interface board mounted on to the front replacement bracket. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 19 CD-ROM drive as shown. Front view of the front replacement bracket with Trip Interface board assembled. Make sure the top cover is screwed back on to the radio unit. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 20 Kia Optima In-Dash Navigation DIY Installation Guide Screw on the replacement mounting brackets (Top and Bottom). Open the glove box and turn the dampers on both sides to disconnect the compartment. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 21 (Images shown on this page may vary) Route the SD/USB interface cables around from behind the glove box and out through the center dash panel opening. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 22 (Images shown on this page may vary) EXAMPLE ONLY Run the interface cables through the drilled hole. Mount the control box inside the glove box as shown. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 23 Installation Manual PAGE VERSION Kia Optima In-Dash Navigation DIY Installation Guide Bend the audio support bracket downwards. Connect the GPS antenna to the female connector labeled “GPS” Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 24 Route the antenna cable carefully to avoid damage. Connect the external speaker to the female connector labeled “BUILT-IN SPEAKER”. This speaker will allow sound output from the UNAVI system when the audio is in XM/Radio/CD/MP3/Bluetooth mode.
  • Page 25 Driver (exposed or hidden) and where it can be mounted from causing any obstructions to other components. Connect the main factory audio cable (24-pin) to the SMART cable harness Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 26 Clear of any obstructing cables and mount the audio unit back into the dash panel. Check the cables are not being too tightly squeezed in the back of the audio unit. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 27 Plug in the 20-pin connector to the Trip Interface board as shown. Plug in the remaining cables to the back of the LCD panel as shown. Information & Manual Date: 3/26/2013 Copyright © 2013 UNAVI USA, Inc. All rights reserved.
  • Page 28 Installation Manual PAGE VERSION Kia Optima In-Dash Navigation DIY Installation Guide Assemble the Unavi fascia kit and the climate control back into the dash. [INSTALLATION COMPLETE] For additional support and information, please visit us at www.buyunavi.com Thank you for choosing UNAVI! Information &...