Shaft Eject Assy (Fu)/ Shaft Eject Assy - Oki C710 Maintenance Manual

Oki Data CONFIDENTIAL
4.2.22 Shaft eject Assy (FU)/ Shaft eject Assy(FD/ Eject
sensor
(1) Remove the eject Assy. (See section 4.2.16)
(2) Disengage the claws (2 places), and disassemble the Assy into guide eject
lower and guide eject upper
(3) Remove the gear idle eject
and shaft Assy eject (FD)
(4) Remove the lever eject sensor
43856301TH Rev.3
.
, , , and remove the shaft Assy eject (FU)
.
and eject sensor .
4. Component replacement
79 /