Top Cover Assy - Oki C710 Maintenance Manual

Oki Data CONFIDENTIAL
ID-FAN cable
Control Panel
ID Motor Cable
Toner Sensor PCB
1st Paper end Cable
Front Sensor Cable
Hoppng Motor Cable
Solenoid Cable
DCID
43856301TH Rev.3
RFID cable
Stack full sensor cable
Controller PCB
Relay
High voltage
Fuser Motor Cable
Low voltage Pow Unit
Belt IDup Motor Cable
100V or 120V Plug On 230V UnPlug
Option Cable
SSNS
PE
BELIDUP HVOLT
POWFAN
RELAY
OPTION POWER

4.2.10 Top cover Assy

C-LED-HEAD
M-LED-HEAD (1) Remove the left side cover. (See section 4.2.3)
Y-LED-HEAD
K-LED-HEAD
(2) Remove the right side cover. (See section 4.2.4)
(3) Remove the rear cover. (See section 4.2.6)
(4) Remove the plate shield Assy (PLD/GDI) and take the control PCB out. (See
section 4.2.8 (1)-(7))
(5) Remove the connectors of the stack full sensor cable and ID-FAN cable, remove
the connector and the hanging RFID cable
(6) Remove two E type stop rings
Heater AC Cable
cover Assy
Hook on connector (230V)
AC
.
and two torsion springs
.
4. Component replacement
, and remove the top
69 /