How To Clean The Led Lens Array - Oki C710 Maintenance Manual

Oki Data CONFIDENTIAL

6.2 How to clean the LED lens array

If the white banding, white stripe (white drop-out, light printing) in the vertical direction
occurs on the print surface, clean the LED lens array.
White banding, white stripe
(white drop-out, light printing)
43856301TH Rev.3
Perform cleaning of the LED head.
If any light print or white banding is recognized or if print character becomes blurred,
clean the LED head as descried below.
(1) Turn off the power of the printer.
(2) Press down the OPEN button to open the top cover.
Personal injuries may occur.
The fuser unit gets very hot. Do not touch the fuser unit.
6. Periodic Maintenance
O I
OPEN button
120 /